Zappi - Eddy Current Conductivity Meter - Products
Português   Español   English


→  NEW Conductivity meter for non-ferromagnetic metals - DC-11M

The new DC-11M Eddy Current Conductivity Meter for metals replaces our previous model (DC-10S), is easy to use and has a small diameter sensor (10mm) which allows measurements in small samples even with oxidized or dirty surfaces.

Conductivity measurements are returned in %IACS (Percentage of International Annealed Copper Standard) units and optionally in MS/m. The conductivity of copper is approximately 100 %IACS at 20°C.

Our instrument is calibrated against international standards (Boeing) and measures non-destructively based on the Eddy Current principle.

The conductivity of metals changes with temperature but readings are compensated automatically to the values at 20°C by adjustment with known standards provided with the instrument. Contact us for more information.

Download brochure by clicking here

Watch below a short video demonstrating the simplicity of use of the DC-11M. Please turn on closed captions for a description of the procedure

DC-11M demonstration - basic use from Paulo Zappi on Vimeo.